40 Cr钢转向节轴部直径对其淬火态组织和硬度的影响
Shanghai Metals(2022)
Abstract
将轴部直径为50和70 mm的40Cr钢转向节加热至860℃保温120 min水淬.检测了不同轴径的转向节淬火后的显微组织和硬度.结果表明:轴径为50 mm的转向节从表面到心部的组织主要为马氏体,而轴径为70 mm的转向节表面为马氏体,芯部为珠光体+少量铁素体.轴径为50 mm的转向节被淬透,从表面至15 mm深处的平均硬度为54 HRC;而轴径为70 mm的转向节未被淬透,从表面至15 mm深处的平均硬度为50 HRC.
MoreAI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined