Methane emissions from five Danish pig farms: Mitigation strategies and inventory estimated emissions.

This study investigated whole-farm methane emissions from five Danish pig farms with different manure management practices and compared measured emission rates to international and national greenhouse gas inventory emission models. Methane emissions were quantified by using the tracer gas dispersion method. Farms were measured between five and eight times throughout a whole year. One of the farms housed sows and weaners (P1) and the others focused on fattening pigs (P2-P5). The farms had different manure treatment practices including biogasification (P3), acidification (P4-P5) and no manure treatment (liquid slurry) (P1-P2). Quantified methane emissions ranged from 0.2 to 20 kg/h and the highest rates were seen at the farms with fattening pigs and with no manure treatment (P2), while the lowest emissions were detected at farms with manure acidification (P4 and P5). Average methane emission factors (EFs), normalised based on livestock units, were 14 ± 6, 18 ± 9, 8 ± 7, 2 ± 1 and 1 ± 1 g/LU/h, for P1, P2, P3, P4 and P5, respectively. Emissions from fattening pig farms with biogasification (P3) and acidification (P4-P5) facilities were 55% and 91-93% lower, respectively, than from farm with no manure treatment (P2). Inventory models underestimated farm-measured methane emissions on average by 51%, across all models and farms, with the Danish model performing the worst (underestimation of 64%). A revision of model parameters related to manure emissions, such as the estimation of volatile solids excreted and methane conversion factor parameters, could improve model output, although more data needs to be collected to strengthen the conclusions. As one of the first studies assessing whole-pig farm emissions, the results showed the potential of the applied measuring method to identify mitigation strategy efficiencies and highlighted the necessity to investigate inventory model accuracy.