Optimization of high-energy ball milling process for uniform p-type Bi-Sb-Te thermoelectric material powder
Korean Journal of Chemical Engineering(2022)
摘要
Ball milling is widely used for producing powders of thermoelectric materials owing to its simplicity and scalability. In this research, we investigated the particle shape and size in p-type Bi-Sb-Te materials—the best-known and only commercially available thermoelectric materials at present—after high-energy ball milling. Although Bi-Sb-Te materials are known to be brittle, some ductile properties, such as particle agglomeration and welding, were observed. To avoid an increase in particle size via welding and to obtain particles with highly uniform sizes, two-step ball milling was performed and particle sizes were analyzed. The ball-milled powder was consolidated and sintered, and the resulting pellets showed no crystallographic orientation and consequently exhibited uniform thermal and electrical conductivities regardless of measurement direction.
更多查看译文
关键词
Ball Mill, Bi-Sb-Te, Thermoelectric, Cold Welding
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要