DEVELOPMENT AND EVALUATION OF FINGER WHEEL AND CUTTING DISC COMBINED DEVICE FOR STALK RETURNING

Stalk returning technology was an important way to preserve soil nutrients and reduce soil erosion. It was of great significance to improve the stalk chopping quality, reduce power consumption. On the basis of the previous research, the finger wheel and cutting disc combined device for stalk returning was developed, mainly composed of the sawtooth blade group, the finger wheel and the stalk lifting grid. The stalk was fed into the cutting area of the sawtooth blades by the rotation of the finger wheel, and the operation of the stalk chopping was completed under the combination of the sawtooth blade group and the finger wheel. The movement of stalks in the device with finger wheel and sawtooth blades was analysed by high speed photography, and the rotational speed of finger wheel, the rotational speed of sawtooth blade group, the stalk feeding speed had a great influence on the movement of the stalks. Through orthogonal test and verification test, the clamping angle was 20 degrees, the rotational speed of sawtooth blade group was 800 min(-1), the stalk feeding speed was 1.45 m/s, the rotational speed of finger wheel was 110 min(-1), the cut length qualified rate was 92.47% and the cutting power was 529.97 W. The test results met the quality requirements of the Chinese national standard. The related research can provide reference for the research of stalk returning device.