Numerical scrutinization of dropwise condensation heat transfer on an inclined surface

Recently, achieving an ameliorated heat transfer rate in dropwise condensation (DWC) has attracted the attention of many researchers. Several parameters, including chemical and physical properties of the substrate, inclination, and interfacial characteristics influence DWC heat transfer rate. The variation of inclination angle is followed by the change in droplet shape and consequently, the heat transfer rate are changed. In this study, the effect of droplet shape variation on diverse inclined substrates is simulated. Moreover, three-dimensional mass, momentum, and energy equations considering the desired boundary conditions on the unstructured grid are utilized for the scrutinization of flow behavior and heat transfer for static and sliding droplets. For the sake of validation, the outcomes obtained from the simulation were compared with existent data in the literature and a proper agreement was attained. Regarding the outcomes, it was of concern that the influence of inclination angle on the droplet shape is more distinct at higher droplet volume; while no considerable change was seen on heat flux of small droplets by increasing the inclination angle. Furthermore, a higher heat transfer rate was noted by exceeding the inclination angle beyond a definite angle. Additionally, the increased heat transfer rate was affirmed by increasing the Marangoni number (Ma).