Technological characterisation of wood from Australian red cedar after first thinning of a plantation at five years

Australian red cedar (Toona ciliata M. Roem.) is a forest species planted in Brazil especially for lumber production. This study aimed to evaluate technological properties of the wood after selective first thinning of a plantation 5 years after planting. The technological properties evaluated were: (i) physical - apparent specific mass at 12% moisture content and shrinkage; (ii) mechanical - modulus of elasticity (E), modulus of rupture (sigma), and brittleness; (iii) weathering; (iv) surface macrostructure - colour and roughness; (v) chemical - soluble and insoluble lignins, and holocellulose and ash contents; and vi) thermal - thermogravimetric analysis and calorific value. Apparent specific mass was 380 g m(-3); the calculated shrinkage anisotropy of 1.04 and swelling anisotropy of 1.14 fit the classification 'excellent quality'; the elasticity modulus was calculated as 4 700 MPa, and strength to flexion was 45 MPa. The mechanical properties other than brittleness were not compromised with weathering exposure. However, the accelerated weathering testing as a simulation of natural weathering showed modified colour of the wood and reduction of the mechanical properties. The calorific value of the wood (4 634.03 Kcal g(-1)) was similar to that reported for other fast-growing woods at even more advanced planting ages. Thermal stability of the wood was comparable to other fast-growing species used for energy purposes, owing especially to high holocellulose content.