Detecting and mapping a CO2 plume with novel autonomous pH sensors on an underwater vehicle
International Journal of Greenhouse Gas Control(2021)
Abstract
We report the first successful use of chemical sensors integrated on to an underwater vehicle to locate, map and estimate flux from a controlled sub-seabed CO2 release, analogous to a leak from a Carbon Capture and Storage (CCS) reservoir. This has global implications for the efficacy and cost of monitoring of offshore CCS sites and hence public and regulatory confidence as this tool for addressing climate change is considered and rolled out. A remotely operated vehicle (ROV) equipped with three different pH sensors was deployed to determine the spatial extent of the controlled release. The sensors each operated on a different principle (spectrophotometric, fluorescence, and electrochemical) and the strengths and weaknesses of each sensor are discussed. The sensor data demonstrated that evidence of the plume was limited to within 3 m of the seafloor, as predicted by previous modelling work. The data were then utilised to develop a model of the plume, to extend the spatial coverage of the data. This comparison of the three sensors and the insight into plume dynamics provided by the model would assist in the planning of future plume surveys to ensure the sensor and vehicle combination can resolve the plume of interest.
MoreTranslated text
Key words
Autonomous platforms,Vehicle,pH sensors,Marine,Chemical plume,CO2 reservoir monitoring
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined