Electrical Response of the Spinel ZnAl2O4 and Its Application in the Detection of Propane Gas

Nanoparticles of the semiconductor ZnAl2O4 were prepared using a microwave-assisted wet chemistry method in the presence of ethylenediamine and calcination at 250 & DEG;C. The material's crystallinity and purity were verified by X-ray diffraction. The pure phase of the ZnAl2O4 presented a cubic crystalline structure with cell parameters a = 8.087 & ANGS; and space group Fd-3m (227). Dynamic tests in propane atmospheres were carried out on pellets (~500 mu m in diameter) manufactured with ZnAl2O4 powders. In the tests, the oxide showed variations with time in electrical resistance when injecting air-propane at an operating temperature of 250 & DEG;C. The pellets showed good stability, high sensitivity, and an optimal dynamic response as a function of time. On the other hand, a mathematical model was proposed to describe the chemical sensor's dynamic behavior based on the electrical response and linear systems theory. The sensor's transient response was obtained with the model by exposing the oxide to air and propane gas; its stability was checked, and the stabilization time was calculated. Subsequently, an operating point was selected, and, with it, a propane gas detector was designed. The sensor operated flawlessly at 250 & DEG;C at a concentration of 1000 ppm, with a response time of three seconds. The developed device is inexpensive and easy to implement.