Effect of Additives on Making Texture Surface on Multicrystalline Silicon Wafer by Diamond Wire Sawing

In the production of multicrystalline silicon solar cell, diamond wire sawing method (DWS) is an important technique, which has already completely replaced multiwire slurry sawing (MWSS) method. And the making texture surface is one of the crucial steps for preparing silicon solar cells. Acid etching method with additives is an effective way to make texture surface on DWS multicrystalline silicon wafer surface. The texture structure was obtained in an acid solution by adding NaNO 2 , a mixture solution of PEG and PVA, DBSA and sodium citrate solution, and the volume ratio of HF, HNO 3 and H 2 O for acid solution is 1:5:3. The reflectivity of silicon surface after etching can reduce to 20.06%, and the depth-to-width ratio of texture structure is 0.55. The photovoltaic conversion efficiency of solar cell obtained under this condition is the highest, the maximum value is 18.69%.