Broadband seismic source data acquisition and processing to delineate iron oxide deposits in the Blotberget mine-central Sweden

A prototype electromagnetic vibrator, referred to here as E-Vib, was upgraded and developed for broadband hardrock and mineral exploration seismic surveys. We selected the iron oxide mine in Blotberget, central Sweden, for a test site in 2019 for the newly developed E-Vib because of the availability of earlier seismic datasets (from 2015 to 2016) for verification of its performance for hardrock imaging purposes. The two-dimensional data acquisition consisted of a fixed geometry with 550 receiver locations spaced at every 5 m, employing both cabled and wireless seismic recorders, along an approximately 2.7 km long profile. The E-Vib operated at every second receiver station (i.e. 10 m spacing) with a linear sweep of 2-180 Hz and with a peak force of 7 kN. The processing workflow took advantage of the broadband signal generated by the E-Vib in this challenging hardrock environment with varying ground conditions. The processed seismic section shows a set of reflections associated with the known iron oxide mineralization and a major crosscutting reflection interpreted to be from a fault system likely to be crosscutting the mineralization. The broadband source data acquisition and subsequent processing helped to improve signal quality and resolution in comparison with the earlier workflows and data where a drophammer seismic source was used as the seismic source. These results suggest new possibilities for the E-Vib source for improved targeting in hardrock geological settings.