Analysis of interpenetrating metal ceramic composite structures using an enhanced random sequential absorption microstructure generation algorithm

In this paper, we present the analysis of an interpenetrating metal ceramic composite structure. We introduce a new generation algorithm for the modeling of interpenetrating composite microstructures with connected, spherical cavities embedded into an open-porous foam structure. The method uses a geometric ansatz and is designed to create structures of special topology, as the investigated metal ceramic composite structures consisting of a connected AlSi10Mg phase showing spherical shapes embedded into an Al 2 O 3 preform. Based on the introduced enhanced random sequential absorption approach, the generated microstructures yield numerical insights into the material that are not accessible by experimental techniques. The generated microstructures are compared to structures reconstructed from experimental CT scan data considering microstructural features and mechanical behavior. We show that the proposed method is able to generate statistically equivalent microstructures by using only a small number of statistical descriptors. The numerical formulation is validated using compression tests including plastic yielding in the aluminum and damage progression in the ceramic phase. Both the composite material and the pure ceramic preform are considered in this analysis, and good agreement is found between reconstructed and generated microstructures. Furthermore, the observations reveal the importance of the local geometrical sphere arrangement with respect to the mechanical behavior. A validation with experimental results is presented and it is shown that the model predicts microstructural properties and gives meaningful insights into the structural and material interplay. Finally, we discuss the potential of the method for the investigation of failure mechanisms.