Development of the Q-band ECE imaging system in the large helical device

In this study, we developed the Electron Cyclotron Emission Imaging (ECEI) system with the Q-band in the Large Helical Device (LHD). ECEI measurement makes it possible to obtain the spatiotemporal structure of magnetohydrodynamics (MHD) instabilities in the high-beta plasma. Although there were several difficulties for realizing the multi-channelization, such as local oscillator (LO) optics and an expensive high-power LO source, we have solved these problems by developing a Local Integrated Antenna array (LIA) which has an internal LO supply, using a frequency doubler integrated circuit on each channel, instead of a conventional Horn-antenna Mixer Array (HMA) with common LOs. In addition, we have made some improvements to enhance the quality of the measurement signal. First, we developed and introduced notch filters that prevent the strong Electron Cyclotron Resonance Heating (ECRH) stray signal from being mixed into the measurement circuit. Second, the position of the doubler built in the printed circuit board was reconsidered to prevent the mixing of higher harmonic components into the mixer. Also, we have adopted the Logarithmic detector (LOG detector) to deal with the wide dynamic range of the plasma fluctuation. After these improvements, for the first time, we could successfully obtain the initial results of the two-dimensional temperature distribution and its fluctuation distribution in the LHD.