Toughening of polybutene-1 with form I ' induced by rapid pressurization

Rapid pressurization (RP) induced crystallization of polybutene-1 (PB-1) is performed at different temperatures of 90 degrees C, 125 degrees C and 180 degrees C under various pressures. The mechanical properties of RP PB-1 are investigated with a tensile device and in situ wide-angle X-ray diffraction (WAXD) is used to record the structural evolution during deformation. Using differential scanning calorimetry (DSC) and WAXD, it is found that RP in the melt state produces forms I/I ', while stable form I with a high melting point is generated by RP at 90 degrees C. All three RP PB-1 samples at 180 degrees C have lower melting temperature of form I crystals, and their fracture strain is nearly three times that of normal form I. P1T90 shows a small fracture strain equivalent to that of normal form I, because RP at 90 degrees C only accelerates the phase transition from form II to I. Form I ' that directly crystallized from the melt state and the thinner lamellae of form I contribute to excellent toughness, which are conducive to the molecular orientation along the stretching direction. The optimization of toughness caused by rapid pressurization provides a new idea for the regulation of the mechanical properties of PB-1.