Heat Production from Single Fracture Hot Dry Rock, Applications for EGS Reservoir Design
Geotechnics(2022)
摘要
A new analytical solution for the thermal-hydraulic coupling process is derived with a 1-D steady state conductive heat flow in the body of hot rock with perpendicular water flow in the single fracture and transient heat transfer from rock to water. The heat produced from the hot rock via water flow in the idealized single fracture is demonstrated by arithmetic equations. The applicability of the analytical solution is verified by numerical calculations and is limited to conditions with fast water flow rates or high water flux and long fluid pathways. The lifetime of an EGS reservoir in these reference conditions is 23.2 years and is confined by the produced water temperature of 150 °C for commercial utilization. The heat recovery factor is 12.4%. With a power plant capacity of 5 Mw installed, the total area for extracting recoverable heat within the projected lifetime of a fracture surface of 1.58 × 106 m2 was determined. The total mass flow rate of water injected into the large fracture was 57 kg/s. The discussion shows the ability of the model to estimate heat production and reservoir scale.
更多查看译文
关键词
enhanced geothermal system (EGS),hot dry rock (HDR),single fracture,heat production,reservoir design
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要