Design of crack deflection induced high toughness laminated Si3N4 ceramics based on hollow oriented one-dimensional microstructure
Ceramics International(2022)
Abstract
A laminated silicon nitride (Si3N4) ceramic material with a hollow, oriented, one-dimensional microstructure was successfully prepared based on the tape casting and sacrificial template method. The results show that hollow, oriented, one-dimensional microstructures can effectively induce crack deflection. Different arrangements of the structural design layer and dense layer will have different effects on the material. In particular, bulks with a single-layer orthogonal arrangement of the structural design layer possess high toughness and obvious crack deflection during the fracture process. A kind of multiscale crack deflection mode was realized. Compared with the fracture toughness of the monolithic Si3N4 ceramic bulk (5.55 MPa m1/2), the fracture toughness can reach 8.73 MPa m1/2, and the flexural strength can still reach 391.47 MPa with only a slight decrease.
MoreTranslated text
Key words
Tape casting,Sacrificial template,Hollow oriented one-dimensional microstructures,Induced crack deflection
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined