Design of Phase Angle Measurement System for Single-Phase Line Based on MATLAB
2021 3rd International Conference on Intelligent Control, Measurement and Signal Processing and Intelligent Oil Field (ICMSP)(2021)
摘要
In order to improve the power quality of the power transmission system, engineers must measure the phase angle of the transmission line to evaluate the power quality. Therefore, this article measures the phase angle by measuring the real-time voltage signal and current signal of the single-phase transmission line. This design is considered from the two aspects of hardware and software as well as the upper computer and the lower computer cooperate to test. The whole system uses ARM as the core to measure and process the parameters of the transmission line, which combined with the characteristics of ARM for signal acquisition, analog-to-digital conversion, data processing. The lower computer uploads it to the upper computer MATLAB for programming calculation through serial communication, and it uses the cross-correlation function method to measure the phase angle between voltage and current to meet the design requirements. The above design has been proved through experiments that it can be applied to engineering practice. The cross-correlation function algorithm in MATLAB closely fits the measurement of the phase angle of the transmission line. It proposes a new method for the measurement of the phase angle and lays a solid foundation for the future phase angle optimization.
更多查看译文
关键词
MATLAB,line parameters,cross-correlation function,phase angle
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要