Roll-to-roll dielectric metasurfaces
Metamaterials, Metadevices, and Metasystems 2020(2020)
Abstract
Dielectric metasurfaces, which consist of spatially distributed sub-wavelength structures that impart controlled local phase shifts to the exiting light, allow access to modifying the wavefront and achieve desired function of the output beam. By adjusting the sub-wavelength structures’ shape, size, and choice of material, one can locally control the effective refractive index that affects the output light’s phase, amplitude, and dispersion, allowing various degrees of freedom in design parameters. The first generation of metasurfaces consisted of individual lab prototypes that in crucial parts relied on electron beam lithography, which severely restricted scalability. Meanwhile, mask-based methods such as deep UV lithography have been successfully adopted. While such methods open the door to high-throughput fabrication of metasurfaces, they are still limited in their achievable sample dimensions due to size restrictions imposed by wafer-based methods. By using roll-to-roll (R2R) methods, we were able to make large area metasurfaces that could find their use in displays and AR/VR applications, for example. In addition, R2R creates a lower cost method of manufacture for large volumes. In order to utilize R2R methods, there are two important challenges to overcome. First, the pattern must be extended over the large area of a film surface. Second, standard metasurface designs need to be adapted to the material and process constraints of R2R manufacturing. The R2R fabrication route is an extension of large-scale industrial processes that can produce wide format rolls of film.
MoreTranslated text
Key words
dielectric metasurfaces,roll-to-roll
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined