3D Data Fusion Using Unmanned Aerial Vehicle (UAV) Photogrammetry and Terrestrial Laser Scanner (TLS)

Recognizing the various advantages offered by 3D new metric survey technologies for 3D modelling reconstruction, this study presents a method or procedure of complete 3D data acquisition, using different sensors, and their possible fusion. Besides, this involved a discussion of the capability of UAV photogrammetry in order to collect data for the rooftop of the building with the low cost and combine the data with terrestrial measurement technique. Meanwhile, the aim of this study is to identify the minimum network configuration as to combine TLS and UAV photogrammetry data fusion. Hence, some procedure has been done in the methodology by registering TLS and UAV point clouds by employing multinetwork configuration. Furthermore, the data fusions’ results were evaluated on the registration error of UAV towards TLS coordinate system via the various number of network configuration samples. Based on the experimental results, the sample of network configuration for the three registration points results in a good condition due to the well-distributed registration points and less errors of both point clouds’ registration. As conclusion, a good quality of data fusion between TLS and UAV photogrammetry is determined by a good selection number of the registration points via several samples of network configuration.