Predicting Electrospun Anion Exchange Membrane Conductivity in the Presence of Carbon Dioxide
ECS Meeting Abstracts(2018)
Abstract
Abstract Electrospinning is a promising technique for polymeric ion exchange membrane (IEM) fabrication because it enables good control of microstructural and morphological properties. Recent work1 developed a fiber network model to predict carbonate-free electrospun IEM hydroxide conductivity based on a simulation of randomly oriented conducting fibers and a subsequent application of Kirchoff’s circuit laws to solve the equivalent resistor network. A promising application for electrospun membranes is in anion exchange membrane (AEM) fuel cells. By controlling the microstructure and morphology via electrospinning, electrospun AEMs could exhibit improved transport properties compared to AEMs fabricated using other techniques. The transport properties of these other classes of AEMs, referred to as “bulk membranes”, have also been investigated2, including the effects of carbon dioxide absorption3–5 which is a problem in AEM fuel cell operation. The missing link therefore, is to characterize the effects of carbon dioxide on electrospun AEMs. The bulk membrane models2–5 describe ion transport in a water-saturated bulk material. On the other hand, the fiber network model describes transport in layers of randomly oriented saturated (and therefore conducting) fibers imbedded in a non-conducting hydrophobic matrix. The mapping procedure is a means of converting the layered fiber configuration into an equivalent bulk configuration based on maintaining the volume fraction of water in the process. Scaling laws are given for mapping the fiber network parameters to those of an equivalent bulk membrane. The equivalent bulk membrane yields the same conductivity as the fibrous membrane for the carbonate-free case, and is then used to assess the effects of CO2 (i.e. carbonates) following the established procedure5. Acknowledgements Financial support from the Army Research Office (award number W911NF-14-1-0298) is gratefully acknowledged. The authors would also like to acknowledge the support of and discussions with Dr. Cynthia Lundgren and Dr. Deryn Chu of the U.S. Army Research Laboratory. References DeGostin, M. B., Peracchio, A. A., Myles, T. D., Cassenti, B. N. & Chiu, W. K. S. Charge transport in the electrospun nanofiber composite membrane’s three-dimensional fibrous structure. J. Power Sources 307, 538–551 (2016). Grew, K. N. & Chiu, W. K. S. A Dusty Fluid Model for Predicting Hydroxyl Anion Conductivity in Alkaline Anion Exchange Membranes. J. Electrochem. Soc. 157, B327 (2010). Myles, T. D., Grew, K. N., Peracchio, A. A. & Chiu, W. K. S. Transient ion exchange of anion exchange membranes exposed to carbon dioxide. J. Power Sources 296, 225–236 (2015). Grew, K. N., Ren, X. & Chu, D. Effects of temperature and carbon dioxide on anion exchange membrane conductivity. Electrochem. Solid-State Lett. 14, B127–B131 (2011). Wrubel, J. A. et al. Anion Exchange Membrane Ionic Conductivity in the Presence of Carbon Dioxide under Fuel Cell Operating Conditions. J. Electrochem. Soc. 164, F1063–F1073 (2017).
MoreTranslated text
Key words
membrane,anion
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined