Study on the Relationship between Concentration of JGB and Current Density in TSV Copper filling

비아 필링에 있어서 void나 seam 생성이 없이 비아를 채우는 것은 매우 중요한 사항으로 전류밀도, 전류모드, 첨가제 등을 변화시켜 결함없는 비아를 얻어왔다. 그러나 다양한 첨가제의 부산물이 오염의 원인이 되며 도금액의 수명을 줄이는 문제점이 있었다. 본 연구에서는 오염을 최소화하기 위하여 다른 첨가제가 없이 JGB만을 사용하여 JGB 농도와 전류밀도 변화에 따른 비아 필링 현상을 연구하였다. 지름이 $15{\mu}m$이며 종횡비 4인 비아가 사용되었으며 펄스전류를 이용하여 도금을 하였다. 전류밀도는 $10{\sim}20mA/cm^2$, JGB 농도는 0~25 ppm까지 변화시키면서 JGB 농도와 전류밀도와 의 상관관계를 mapping 하였다. 그로부터 지름이 $15{\mu}m$이며 종횡비 4인 비아 필링의 최적 조건을 확립하였다. The requirement for success of via filling is its ability to fill via holes completely without producing voids or seams. Defect free via filling was obtained by optimizing plating conditions such as current mode, current density and additives. However, byproducts stemming from the breakdown of these organic additives reduce the lifetime of the devices and plating solutions. In this study, the relationship between JGB and current density on the copper via filling was investigated without the addition of other additives to minimize the contamination of copper via. AR 4 with $15{\mu}m$ diameter via were used for this study. The pulse current was used for the electroplating of copper and the current densities were varied from 10 to $20mA/cm^2$ and the concentrations of JGB were varied from 0 to 25 ppm. The map for the JGB concentration and current density was developed. And the optimum conditions for the AR 4 via filling with $15{\mu}m$ diameter were obtained.