Production of process flavorings from methionine, thiamine with d-xylose or dextrose by direct extrusion: Physical properties and volatile profiles

The conventional method to produce process flavoring is non-continuous, time consuming, and generates a high volume of effluent. This research aimed to evaluate the use of methionine, thiamine, and reducing sugars to develop process flavorings by direct extrusion, as a potential alternative to the conventional method. The mixed substrates consisted of methionine: d-xylose (MX), methionine: dextrose (MD), thiamine: d-xylose (TX), and thiamine: dextrose (TD) at 80:20 w/w. Three barrel temperatures of the extruder were controlled at 65, 80, and 50 degrees C, respectively, a screw speed of 30 rpm and feed rate at 3 kg/hr. Appearance, pH, odor, and taste description of the product from each mixture were determined. Volatile compounds, possibly occurred from the Maillard reaction during the extrusion were analyzed by gas chromatography-mass spectrometry. The products exhibited different levels of meaty odor and bitter taste. Those obtained from MD showed the highest L* (lightness, 85.37) and frequency for just-about-right in terms of taste (33.33%) and odor (60.00%). Products from MX and MD presented the highest frequency for intense taste, and higher frequency for color compared to TX and TD. More volatile compounds were detected from the use of methionine than from thiamine. The key meaty odor compounds such as dimethyl disulfide, dimethyl trisulfide, methional, and methanethiol were found in the samples from MX and MD, while only dimethyl disulfide was detected in the mixture of TX and TD. Finally, the results demonstrated that direct extrusion reaction from methionine and d-xylose or dextrose is a highly efficient method to produce meaty process flavorings. Practical Application The manuscript describes the production of process flavorings that exhibited meaty flavors by extrusion process. Physical properties, volatile profiles, and sensory evaluation of the products from methionine, thiamine, d-xylose, and glucose were evaluated. The extruded products from methionine and dextrose exhibited acceptable color, taste, and odor and presented many volatiles compounds contributing to meaty flavors. The results revealed the high potential to use a direct extrusion process with very low effluent, compared to the conventional method, to produce meaty flavors for industrial application.