Conformable Metal Oxide Platelets-A Smart Surface Armor For Green Tribology

The reduction of friction and wear is a crucial performance criterion for most technical processes. This is particularly true for the ubiquitous case of oil lubricated machinery made from steel components. Here we introduce a facile laser treatment that significantly enhances the tribological performance of bearing steel 100Cr6, a material widely used for the manufacture of ball and roller bearings. By applying repeated nanosecond-pulses of focussed laser-beam irradiation under ambient air, a surface-protective tribo-layer is generated by a method that exploits self-organization for the formation of conformable metal oxide platelets consisting of vertically aligned transition metal oxides nanorods on the steel substrate. These submicron-sized metal oxide platelets protect the surfaces similar to scale armor and the tribological performance of the bearing steel 100Cr6 was significantly enhanced. Based on laboratory tests using a rotational pin-on-disk tribometer under oil lubricated conditions, close to zero wear with simultaneous reduction of friction by 54% was achieved. Even under the harsh conditions in the pin-on-disk tribometer these metal oxide platelets turn out to be remarkably robust against detachment and crumbling for lasting millions of cycles at a slip rate of 100%. The origin of this resilience is based on a special substructure of the platelets that, counter-intuitively for ceramic material, enables shape adaptations to surface deformations emergent upon high mechanical stress.