Potential-Scanning Sensing for Refractive Index Using an Indium Tin Oxide (ITO)-Coated Long-Period Fiber Grating (LPFG)
ANALYTICAL LETTERS(2022)
Abstract
Here is presented a potential-scanning sensing technique for refractive index detection using a long-period fiber grating (LPFG) coated with indium tin oxide (ITO). The LPFG was produced by an electric arc-induced technique. The sensing is achieved by controlling the electron density of the ITO electrode by potential scanning. The attenuation peak of the LPFG in the transmittance spectra is shifted by the application of a potential. Therefore, a transmittance-potential spectrum with an attenuation peak is obtained during potential scanning, and the refractive index near the sensor can be determined from the peak potential at attenuation. The ITO-LPFG was successfully employed to experimentally perform potential-scanning for refractive index detection in sucrose solutions with concentrations between 0% and 33%. A sensor resolution of 0.0063 Delta RI and a sensitivity of 9.9 V/RIU were obtained using this approach. These values were improved using wavelengths that were experimentally shown to provide high sensitivity and refractive index linearity. A minimum sensor resolution of 0.0017 Delta RI and a maximum sensitivity of 26.7 V/RIU were obtained at 1136 nm. The measurements determined from the peak potential in this work were unaffected by variations in the initial light intensity for individual samples. In addition, this sensing approach can be employed in the near-infrared region and is capable of real-time and remote monitoring.
MoreTranslated text
Key words
Long period fiber grating (LPFG) sensors, indium tin oxide (ITO), potential-scanning, refractive index (RI)
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined