Surface Plasmon Resonance On Gold Microstructures

Surface plasmon resonance (SPR) at planar metal/dielectric interfaces and localised SPR (LSPR) for metal nanoparticles have both been extensively studied, but it is less clear what happens to the optical properties of surface plasmon-polaritons (SPPs) at the micrometer scale. This paper characterises the angular responses of microscale gold patterns on a glass substrate using an SPR imaging configuration using a high numerical aperture objective lens. The potential use for biosensing is also discussed.The propagation length of a SPP equals approximately 10 mu m, so the geometries that are investigated are 10 x 16, 10 x 10, 6 x 16, and 6 x 6 x mu m sized rectangles with 2 mu m spacings. The gold patterns are photolithographically produced using an image reversal process. Bright-field microscopy is used to investigate their morphology and stylus pro filometry is used to check the gold thickness. The SPR responses were compared to planar gold film to see if they were characteristic and con firm the relation to SPR.All the gold microstructures present plasmonic properties. SPR dips are observed for all samples, however, they are not as sensitive and are wider than that of planar gold film. This phenomenon becomes more pronounced as the length of the gold structure decreases, because of the spatial constriction of the propagating SPP. The process suggests that the SPR technique can be successfully implemented to detect individual action potentials. Further work is required in order to achieve a reliable process and investigate the capabilities and sensitivity of the proposed technique.