Three kinds of active thin-layer capping materials for reducing the phosphorus load in eutrophic water body: comparison in dynamic experiment

In this article, dynamic simulation experiments have studied the effects of three capping materials, quartz sand (QS), aluminum-based phosphorus-locking agent (Al-PIA), and lanthanum-modified bentonite (LMB) in reducing phosphorus load in eutrophic water bodies. The changes of various forms of phosphorus in Al-PIA and sediment before and after the test were analyzed, and the mechanism of phosphorus migration and transformation in different capping systems was described. The dynamic simulation test lasted 95 days. The results showed that when the initial concentration of total phosphorus (TP) was 3.55 mg/L, the capping strength was 2 kg/m(2) and the hydraulic retention time of water circulation was 0.5 days, indicating that the average reduction rates of TP by LMB, Al-PIA and QS systems were 74.66%, 69.54%, and 3.64%, respectively, compared with the control system. The analysis of variance showed that there were significant differences (P < 0.05) in the TP concentration of the overlying water between the LMB, Al-PIA capping system, and the control system. Lanthanum ions in LMB can fix phosphorus. Al-PIA reduces the phosphorus concentration in water by means of ion exchange, adsorption, complexation, etc. LMB and Al-PIA promoted the migration of phosphorus in sediment. Among them, the phosphorus fixed by Al-PIA was mainly in the form of non-apatite inorganic phosphorus (NAIP) in inorganic phosphorus (IP), which can be seen; Al-PIA can effectively reduce the phosphorus load of eutrophic water.