Fabrication of Weak C-Axis Preferred AlN Thin Film for Temperature Measurement
SENSORS(2021)
Abstract
A weak C-axis preferred AlN thin film with a lot of defects was fabricated for temperature measurement. It was found that the (002) diffraction peak of the thin film increased monotonously with the increase in annealing temperature and annealing time. This phenomenon is ascribed to the evolution of defects in the lattice of the AlN film. Therefore, the relationship between defects and annealing can be expressed by the offset of (002) diffraction peak, which can be used for temperature measurement. Furthermore, a temperature interpretation algorithm Equation based on the lattice parameter (2 theta), annealing temperature and annealing time was established, and a temperature interpretation software was built with MATLAB. Visual temperature interpretation is realized by the software, and the relative error is less than 7%. This study is of great significance for promoting the accurate temperature measurement on the surface of high temperature component.
MoreTranslated text
Key words
weak C-axis preferred AlN thin film,annealing,lattice defect,MATLAB,temperature measurement
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined