Application And Validation Of The Fugitive Dust Source Emission Inventory Compilation Method In Xiong'An New Area, China

The development of a refined fugitive dust emission inventory is vital for prevention and control of air pollution. In this study, a fugitive dust emission inventory of soil dust (SD), road dust (RD), and construction dust (CD) in Xiong'an New Area (XANA) for 2020 was developed by collecting activity data and combining remote sensing and field investigation data based on a popular compilation technology in China. The CALPUFF model was used to elucidate the contribution characteristics of dust sources to ambient particulate matter (PM), and the accuracy of the dust emission inventory compilation method was verified. The results show that the total emissions of PM10 and PM(2.5)were 43,081.14 tons and 9701.69 tons, respectively. Meanwhile, RD and CD were the main emission sources, accounting for over 98.49% of the total emissions. The total contribution from the different types of dust sources to the ambient PM10 was 42.59 mu g/m(3) (2938%), with the contribution of RD (32.63 mu g/m(3), 22.51%) being approximately three times that of CD (9.78 mu g/m(3), 6.74%). Roads were the main source of fugitive dust, but large-scale infrastructure construction was the main cause of the high emission and high contribution of RD. The results show that the emission inventory compilation method can be used to estimate the emissions of dust sources, while the method used to calculate the emission of SD may be more suitable for dry and semi-dry areas with less rainfall. It was also found that when the dust emissions stay stable, the contribution of dust sources to the ambient PM10 in different seasons can vary by 3-4 times. Therefore, under adverse meteorological conditions, it is necessary to strengthen the control of various dust sources and reduce the influence of human factors on them. (C) 2021 Elsevier B.V. All rights reserved.