Mapping Tree Height in Burkina Faso Parklands with TanDEM-X
REMOTE SENSING(2021)
Abstract
Mapping of tree height is of great importance for management, planning, and research related to agroforestry parklands in Africa. In this paper, we investigate the potential of spotlight-mode data from the interferometric synthetic aperture radar (InSAR) satellite system TanDEM-X (TDM) for mapping of tree height in Sapone, Burkina Faso, a test site characterised by a low average canopy cover (similar to 15%) and a mean tree height of 9.0 m. Seven TDM acquisitions from January-April 2018 are used jointly to create high-resolution (similar to 3 m) maps of interferometric phase height and mean canopy elevation, the latter derived using a new, model-based processing approach compensating for some effects of the side-looking geometry of SAR. Compared with phase height, mean canopy elevation provides a more accurate representation of tree height variations, a better tree positioning accuracy, and better tree height estimation performance when assessed using 915 trees inventoried in situ and representing 15 different species/genera. We observe and discuss two bias effects, and we use empirical models to compensate for these effects. The best-performing model using only TDM data provides tree height estimates with a standard error (SE) of 2.8 m (31% of the average height) and a correlation coefficient of 75%. The estimation performance is further improved when TDM height data are combined with in situ measurements; this is a promising result in view of future synergies with other remote sensing techniques or ground measurement-supported monitoring of well-known trees.
MoreTranslated text
Key words
interferometric synthetic aperture radar (InSAR),two-level model (TLM),geometric corrections,spotlight data,vegetation height
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined