Hono Production From Gypsum Surfaces Following Exposure To No2 And Hno3: Roles Of Relative Humidity And Light Source

Nitrous acid (HONO) is a toxic household pollutant and a major source of indoor OH radicals. The high surface-to-volume ratio and diverse lighting conditions make the indoor photochemistry of HONO complex. This study demonstrates surface uptake of NO2 and gaseous HNO3 followed by gas- phase HONO generation on gypsum surfaces, model system for drywall, under reaction conditions appropriate for an indoor air environment. Tens of parts per billion of steady-state HONO are detected under these experimental conditions. Mechanistic insight into this heterogeneous photochemistry is obtained by exploring the roles of material compositions, relative humidities, and light sources. NO2 and HNO3 are adsorbed onto drywall surfaces, which can generate HONO under illumination and under dark conditions. Photoenhanced HONO generation is observed for illumination with a solar simulator as well as with the common indoor light sources such as compact fluorescence light and incandescent light bulbs. Incandescent light sources release more HONO and NO2 near the light source compared to the solar radiation. Overall, HONO production on the gypsum surface increases with the increase of RH up to 70% relative humidity; above that, the gaseous HONO level decreases due to surface loss. Heterogeneous hydrolysis of NO2 is predicted to be the dominant HONO generation channel, where NO2 is produced through the photolysis of surface-adsorbed nitrates. This hydrolysis reaction predominantly occurs in the first layer of surface-adsorbed water.