Thermal Aging Performance Of Glass Fiber/Polyphenylene Sulfide Composites In High Temperature

In order to use the glass fiber reinforced polyphenylene sulfide composites (GF/PPS) in high temperature environments, thermal aging performance of two kinds of commercial grade PPS composites, reinforced by 40% glass fiber, PPS-G40 HM and 1140L4, in thermal aging temperature of 250 degrees C was compared by tensile strength, oxidized layer, color, crystallization and melting behavior. The results showed that tensile strength of GF/PPS composites is significantly decreased with increasing of aging time below 200 h and the tensile strength of aged PPS-G40 HM is higher than that of aged 1140L4. The thickness of dark color area is increased with increasing of aging time. The thickness of oxidized layer of 1140L4 is thinner than that of PPS-G40 HM. However, the color of oxidized layer of PPS-G40 HM is lighter than that of 1140L4. The recrystallization in thermal aging results in the formation of crystal with higher melting point and increased melting temperature of GF/PPS composites. It is found that addition of epoxy resin can increase the initial mechanical property and improve the thermal aging performance of GF/PPS composites. A novel modified GF/PPS composite with higher thermal aging properties was obtained.