Author Correction: Multistep staircase avalanche photodiodes with extremely low noise and deterministic amplification

A three-step staircase avalanche diode was demonstrated and pre-cited gain scaling was confirmed. The technology may be considered as a solid-state analogue to the photomultiplier tube.In 1982, Capasso and co-workers proposed the solid-state analogue of the photomultiplier tube, termed the staircase avalanche photodiode. Through a combination of compositional grading and small applied bias, the conduction band profile is arranged into a series of steps that function similar to the dynodes of a photomultiplier tube, with twofold gain arising at each step via impact ionization. A single-step staircase was previously reported but did not demonstrate gain scaling through cascading multiple steps or report noise properties. Here we demonstrate gain scaling of up to three steps; measurements show the expected 2(N) scaling with the number of staircase steps, N. Furthermore, measured noise increased more slowly with gain than for photomultiplier tubes, probably due to the lower stochasticity of impact ionization across well-designed heterojunctions as compared with the secondary electron emission from metals. Excellent agreement was found between the experiments and Monte Carlo simulations for both gain and noise.