Tensile-Tearing Analysis of Rectangular Thin Film with Central Defect

No AccessTechnical NotesTensile–Tearing Analysis of Rectangular Thin Film with Central DefectKe Wang, Qiang Tao and Changguo WangKe WangNational Key Laboratory of Science and Technology for National Defence on Advanced Composites in Special Environments, Harbin Institute of Technology, 150001 Harbin, People’s Republic of China*Ph.D. Candidate, Center for Composite Materials and Structures; .Search for more papers by this author, Qiang TaoNational Key Laboratory of Science and Technology for National Defence on Advanced Composites in Special Environments, Harbin Institute of Technology, 150001 Harbin, People’s Republic of China†Ph.D. Candidate, Center for Composite Materials and Structures; .Search for more papers by this author and Changguo WangNational Key Laboratory of Science and Technology for National Defence on Advanced Composites in Special Environments, Harbin Institute of Technology, 150001 Harbin, People’s Republic of China‡Professor, School of Astronautics; . Member AIAA.Search for more papers by this authorPublished Online:28 Apr 2021https://doi.org/10.2514/1.J060446SectionsRead Now ToolsAdd to favoritesDownload citationTrack citations ShareShare onFacebookTwitterLinked InRedditEmail About References [1] Pagitz M. and Pellegrino S., “Buckling Pressure of ‘Pumpkin’ Balloons,” International Journal of Solids and Structures, Vol. 44, No. 21, 2007, pp. 6963–6986. https://doi.org/10.1016/j.ijsolstr.2007.03.021 CrossrefGoogle Scholar[2] Tao Q., Wang C., Xue Z., Xie Z. and Tan H., “Wrinkling and Collapse of Mesh Reinforced Membrane Inflated Beam Under Bending,” Acta Astronautica, Vol. 128, Nov. 2016, pp. 551–559. https://doi.org/10.1016/j.actaastro.2016.08.021 CrossrefGoogle Scholar[3] Fang H., Lou M., Huang J., Hsia L.-M. and Kerdanyan G., “Inflatable Structure for a Three-Meter Reflectarray Antenna,” Journal of Spacecraft and Rockets, Vol. 41, No. 4, 2004, pp. 543–550. https://doi.org/10.2514/1.11942 LinkGoogle Scholar[4] Cheng T., Zhang Y., Lai W.-Y. and Huang W., “Stretchable Thin-Film Electrodes for Flexible Electronics with High Deformability and Stretchability,” Advanced Materials, Vol. 27, No. 22, 2015, pp. 3349–3376. https://doi.org/10.1002/adma.201405864 Google Scholar[5] Bauer S., Bauer-Gogonea S., Graz I., Kaltenbrunner M., Keplinger C. and Schwödiauer R., “25th Anniversary Article: A Soft Future: From Robots and Sensor Skin to Energy Harvesters,” Advanced Materials, Vol. 26, No. 1, 2014, pp. 149–162. https://doi.org/10.1002/adma.201303349 Google Scholar[6] Wang X. Q., Chan K. H., Cheng Y., Ding T., Li T., Achavananthadith S., Ahmet S., Ho J. S. and Ho G. W., “Somatosensory, Light-Driven, Thin-Film Robots Capable of Integrated Perception and Motility,” Advanced Materials, Vol. 32, No. 21, 2020, pp. 1–9. https://doi.org/10.1002/adma.202000351 Google Scholar[7] Jacob J. D., Simpson A. and Smith S., “Design and Flight Testing of Inflatable Wings with Wing Warping,” SAE Technical Papers, Vol. 1, No. 3392, 2005. https://doi.org/10.4271/2005-01-3392 Google Scholar[8] Schmidt D. K., “Modeling and Near-Space Stationkeeping Control of a Large High-Altitude Airship,” Journal of Guidance, Control, and Dynamics, Vol. 30, No. 2, 2007, pp. 540–547. https://doi.org/10.2514/1.24865 LinkGoogle Scholar[9] Pearson J. C. and Romanofsky R. R., “Thin Film Antenna Development and Optimization,” Collection of Technical Papers—AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, AIAA Paper 2006-2229, Vol. 11, May 2006, pp. 7613–7620. https://doi.org/10.2514/6.2006-2229 Google Scholar[10] Leipold M., Eiden M., Garner C. E., Herbeck L., Kassing D., Niederstadt T., Krüger T., Pagel G., Rezazad M., Rozemeijer H., Seboldt W., Schöppinger C., Sickinger C. and Unckenbold W., “Solar Sail Technology Development and Demonstration,” Acta Astronautica, Vol. 52, Nos. 2–6, 2003, pp. 317–326. https://doi.org/10.1016/S0094-5765(02)00171-6 CrossrefGoogle Scholar[11] Wang C. G., Tan H. F., Du X. W. and Wan Z. M., “Wrinkling Prediction of Rectangular Shell-Membrane Under Transverse In-Plane Displacement,” International Journal of Solids and Structures, Vol. 44, No. 20, 2007, pp. 6507–6516. https://doi.org/10.1016/j.ijsolstr.2007.02.036 CrossrefGoogle Scholar[12] Deng X. and Pellegrino S., “Wrinkling of Orthotropic Viscoelastic Membranes,” AIAA Journal, Vol. 50, No. 3, 2012, pp. 668–681. https://doi.org/10.2514/1.J051255 LinkGoogle Scholar[13] Senda K., Petrovic M. and Nakanishi K., “Wrinkle Generation in Shear-Enforced Rectangular Membrane,” Acta Astronautica, Vol. 111, June 2015, pp. 110–135. https://doi.org/10.1016/j.actaastro.2015.02.022 CrossrefGoogle Scholar[14] Huang Q., Hu H., Yu K., Potier-Ferry M., Belouettar S. and Damil N., “Macroscopic Simulation of Membrane Wrinkling for Various Loading Cases,” International Journal of Solids and Structures, Vol. 64, July 2015, pp. 246–258. https://doi.org/10.1016/j.ijsolstr.2015.04.003 Google Scholar[15] Sakamoto H., Miyazaki Y. and Park K. C., “Evaluation of Cable Suspended Membrane Structures for Wrinkle-Free Design,” 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2003-1905, April 2003, pp. 1–10. https://doi.org/10.2514/6.2003-1905 Google Scholar[16] Luo Y., Xing J., Niu Y., Li M. and Kang Z., “Wrinkle-Free Design of Thin Membrane Structures Using Stress-Based Topology Optimization,” Journal of the Mechanics and Physics of Solids, Vol. 102, May 2017, pp. 277–293. https://doi.org/10.1016/j.jmps.2017.02.003 CrossrefGoogle Scholar[17] Xuan Y., Guo X., Cui Y., Yuan C., Ge H., Cui B. and Chen Y., “Crack-Free Controlled Wrinkling of a Bilayer Film with a Gradient Interface,” Soft Matter, Vol. 8, No. 37, 2012, pp. 9603–9609. https://doi.org/10.1039/c2sm25487e Google Scholar[18] Yan D., Zhang K., Peng F. and Hu G., “Tailoring the Wrinkle Pattern of a Microstructured Membrane,” Applied Physics Letters, Vol. 105, No. 7, 2014, pp. 1–5. https://doi.org/10.1063/1.4893596 Google Scholar[19] Huang Q., Kuang Z., Hu H. and Potier-Ferry M., “Multiscale Analysis of Membrane Instability by Using the Arlequin Method,” International Journal of Solids and Structures, Vol. 162, May 2019, pp. 60–75. https://doi.org/10.1016/j.ijsolstr.2018.11.023 Google Scholar[20] Huang Q., Yang J., Huang W., Giunta G., Belouettar S. and Hu H., “The Boundary Effects on Stretch-Induced Membrane Wrinkling,” Thin-Walled Structures, Vol. 154, June 2020, Paper 106838. https://doi.org/10.1016/j.tws.2020.106838 Google Scholar[21] Bigaud D., Szostkiewicz C. and Hamelin P., “Tearing Analysis for Textile Reinforced Soft Composites Under Mono-Axial and Bi-Axial Tensile Stresses,” Composite Structures, Vol. 62, No. 2, 2003, pp. 129–137. https://doi.org/10.1016/S0263-8223(03)00099-0 Google Scholar[22] Tessler A. and Sleight D. W., “Geometrically Nonlinear Shell Analysis of Wrinkled Thin-Film Membranes with Stress Concentrations,” Journal of Spacecraft and Rockets, Vol. 44, No. 3, 2007, pp. 582–588. https://doi.org/10.2514/1.22913 LinkGoogle Scholar[23] Maekawa S., Shibasaki K., Kurose T., Maeda T., Sasaki Y. and Yoshino T., “Tear Propagation of a High-Performance Airship Envelope Material,” Journal of Aircraft, Vol. 45, No. 5, 2008, pp. 1546–1553. https://doi.org/10.2514/1.32264 LinkGoogle Scholar[24] Bai J., Xiong J. and Cheng X., “Tear Resistance of Orthogonal Kevlar-PWF-Reinforced TPU Film,” Chinese Journal of Aeronautics, Vol. 24, No. 1, 2011, pp. 113–118. https://doi.org/10.1016/S1000-9361(11)60014-9 Google Scholar[25] Triki E., Vu-Khanh T., Nguyen-Tri P. and Boukehili H., “Mechanics and Mechanisms of Tear Resistance of Woven Fabrics,” Theoretical and Applied Fracture Mechanics, Vol. 61, No. 1, 2012, pp. 33–39. https://doi.org/10.1016/j.tafmec.2012.08.004 Google Scholar[26] Meng J., Li P., Ma G., Du H. and Lv M., “Tearing Behaviors of Flexible Fiber-Reinforced Composites for the Stratospheric Airship Envelope,” Applied Composite Materials, Vol. 24, No. 3, 2017, pp. 735–749. https://doi.org/10.1007/s10443-016-9539-7 CrossrefGoogle Scholar[27] Wang F., Chen Y., Liu G., Guo Z. and Fu G., “Experimental Investigation and Theoretical Analysis of Tear Propagation of GQ-6 Airship Envelope,” Journal of Industrial Textiles, Vol. 48, No. 1, 2018, pp. 304–321. https://doi.org/10.1177/1528083716685906 Google Scholar[28] He R., Sun X. and Wu Y., “Central Crack Tearing Test and Fracture Parameter Determination of PTFE Coated Fabric,” Construction and Building Materials, Vol. 208, May 2019, pp. 472–481. https://doi.org/10.1016/j.conbuildmat.2019.03.046 CrossrefGoogle Scholar[29] Zhang Y., Xu J., Zhou Y., Zhang Q. and Wu F., “Central Tearing Behaviors of PVC Coated Fabrics with Initial Notch,” Composite Structures, Vol. 208, Jan. 2019, pp. 618–633. https://doi.org/10.1016/j.compstruct.2018.09.104 CrossrefGoogle Scholar[30] Bao H., Wu M. and Zhang X., “Tearing Analysis of PVC Coated Fabric Under Uniaxial and Biaxial Central Tearing Tests,” Journal of Industrial Textiles, 2020. https://doi.org/10.1177/1528083720934513 Google Scholar[31] Woo K. and Jenkins C. H., “Analysis of Wrinkling Behavior in Thin Sheets with Damage,” Journal of Spacecraft and Rockets, Vol. 51, No. 2, 2014, pp. 586–594. https://doi.org/10.2514/1.A32595 LinkGoogle Scholar[32] Woo K., Zignego D. L. and Jenkins C. H., “Tearing of Thin Polymer Sheets with Wrinkling,” Journal of Spacecraft and Rockets, Vol. 52, No. 6, 2015, pp. 1680–1690. https://doi.org/10.2514/1.A33283 LinkGoogle Scholar Previous article Next article FiguresReferencesRelatedDetails What's Popular Volume 59, Number 9September 2021 CrossmarkInformationCopyright © 2021 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved. All requests for copying and permission to reprint should be submitted to CCC at www.copyright.com; employ the eISSN 1533-385X to initiate your request. See also AIAA Rights and Permissions www.aiaa.org/randp. TopicsComposite MaterialsDeformationFracture MechanicsInterdisciplinary TopicsMaterial PropertiesMaterialsMaterials and Structural MechanicsMechanical PropertiesNanotechnologyPlastic DeformationSolid MechanicsStructural MechanicsThin Films KeywordsThin FilmsComposite MaterialsBreaking StrengthStress DistributionCrack PropagationStress ConcentrationElastic DeformationPlastic DeformationMaterials TestingTear StrengthAcknowledgmentThis work was supported by the National Natural Science Foundation of China (Grant Nos. 11572099 and 11872160).PDF Received11 December 2020Accepted6 April 2021Published online28 April 2021