Enhanced pumping test using physicochemical tracers to determine surface-water/groundwater interactions in an alluvial island aquifer, river Rhône, France

Groundwater extracted from the Barthelasse Island aquifer, surrounded by the river Rhône (southeastern France), contributes to the drinking water supplies of 180,000 inhabitants. Owing to its location close to the river and the presence of two backwaters (oxbow lakes), the pumped groundwater is highly vulnerable to river pollution. A pumping test was conducted over 24 h to analyse and quantify the water exchange processes between the river, backwaters and groundwater. During the pumping test, isotopic (δ 18 O, δ 2 H and 222 Rn), hydrochemical and hydrophysical monitoring of the groundwater was undertaken. Hydraulic heads were measured in pumping wells and at a piezometer located between the wells. Discrete water samples were collected at several observation points in the field, including the backwater and river. The results show mixing between three end-members, as defined by the deuterium excess and silica concentration, led by river Rhône water which had been affected by water–rock interactions over time and mixing with surface evaporated waters. The pumped water resulted from mixing between three end-members, all of which depended on the river Rhône but differed in terms of residence time in the system. Although the groundwater pumping wells are close to each other (<70 m) and have similar depths, the changes in the contributions from end-member waters at each well were different during the pumping test. Comparing isotopic tracers and geochemistry made it possible to quantify the different hydrological compartments that contribute to the groundwater pumped from the boreholes, which is critical in constructing a conceptual flow model.