In Situ Lithiated Ald Niobium Oxide For Improved Long Term Cycling Of Layered Oxide Cathodes: A Thin-Film Model Study

Protective coatings applied to cathodes help to overcome interface stability issues and extend the cycle life of Li-ion batteries. However, within 3D cathode composites it is difficult to isolate the effect of the coating because of additives and non-ideal interfaces. In this study we investigate niobium oxide (NbOx) as cathode coating in a thin-film model system, which provides simple access to the cathode-coating-electrolyte interface. The conformal NbOx coating was applied by atomic layer deposition (ALD) onto thin-film LiCoO2 cathodes. The cathode/coating stacks were annealed to lithiate the NbOx and ensure sufficient ionic conductivity. A range of different coating thicknesses were investigated to improve the electrochemical cycling with respect to the uncoated cathode. At a NbOx thickness of 30 nm, the cells retained 80% of the initial capacity after 493 cycles at 10 C, more than doubling the cycle life of the uncoated cathode film. Elemental analysis using TOF-SIMS and XPS revealed a bulk and surface contribution of the NbOx coating. These results show that in situ lithiated ALD NbOx can significantly improve the performance of layered oxide cathodes by enhancing interfacial charge transfer and inhibiting surface degradation of the cathode, resulting in better rate performance and cycle life.