The effective removal of nickel ions from aqueous solution onto magnetic multi-walled carbon nanotubes modified by -cyclodextrin
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS(2021)
Abstract
13-cyclodextrin was covalently grafted onto the surface of magnetic multi-walled carbon nanotubes to synthesize a novel composite material (denoted as 13-CD@Fe3O4/MWCNT). The structure of the magnetic material was characterized by using Fourier transform infrared (FT-IR spectroscopy), Raman spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM), and specific surface area (BET). The results from SEM showed that the dispersion of carbon nanotubes was better after 13-cyclodextrin was compounded. TGA indicated that about 7.1% of the 13-cyclodextrin was grafted onto the surface of the magnetic carbon nanotubes. In addition, 13-CD@Fe3O4/MWCNT had larger specific surface area and pore volume. The adsorption of nickel ions on 13-CD@Fe3O4/MWCNT was affected by pH, temperature and adsorption time. The pseudo-second-order kinetic model and Langmuir model describe the adsorption process well. Thermodynamic data showed that the adsorption process was spontaneous and exothermic, and the maximum adsorption amount of nickel ions (Ni2+) on the 13-CD@Fe3O4/MWCNT was 103 mg g-1 at room temperature. Moreover, regeneration experiments showed that the adsorbent still maintained a high adsorption capacity after 5 cycles. On this basis, the interaction mechanism between magnetic nanoparticles and Ni2+ was discussed. In summary, as an environmentally friendly adsorbent, 13-CD@Fe3O4/MWCNT has the potential to remove nickel ions from wastewater.
MoreTranslated text
Key words
Multi-walled carbon nanotubes,Magnetic separation,Nickel ions,Water treatment,?-cyclodextrin
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined