Control of electromagnetic properties during prototyping, fabrication and operation of low- 325 MHz half-wave resonators
JOURNAL OF PHYSICS D-APPLIED PHYSICS(2021)
摘要
The general steps for the fabrication of a copper prototype of 325 MHz coaxial half-wave resonator (HWR) with beta = 0.21 are presented and discussed in this work. The main features for the control of the electromagnetic properties during the manufacturing process of HWR are described in detail. The resonant frequency sensitivity to the accelerating gap and to the cavity height were experimentally estimated. Bead-pull measurements were performed and the electric field distribution along the beam axis of the manufactured cavity was estimated. The features of the cavity's response in the critical coupling regime are analyzed. The experimental concept of a slow frequency tuning system (FTS) based on the moving plungers is proposed and tested. The tuning sensibility is experimentally estimated. The measured results agree with the simulations quite well, and the sensitivity for a single plunger configuration Delta f/Delta L = +13 kHz mm(-1) is achieved. The dynamic properties and operation algorithm of the FTS are studied and experimentally investigated.
更多查看译文
关键词
low-beta cavities,rf properties control,frequency tuning system
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要