Interface crystal domain regulation via TiO 2 surface modification enhancing stability of layered LiNi 0.5 Co 0.2 Mn 0.3 O 2 for lithium-ion batteries

Cyclic stability is one of the key factors limiting the large-scale application of ternary materials for lithium-ion batteries. TiO 2 surface-modified LiNi 0.5 Co 0.2 Mn 0.3 O 2 is prepared by a simple method under low-temperature heat treatment to improve its cyclic stability. It is the first time to interpret the specific mechanism from the perspective of crystal domains, which is explored by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscope (TEM), energy-dispersive X-ray (EDX) mapping, and electrochemical tests in detail. The distribution of TiO 2 and crystal domains are regulated, which stabilizes the interface and reduced the grain boundary, respectively. The increasing of charge transfer impedance and solid electrolyte interphase (SEI) membrane impedance is restrained, which finally improves the cycling stability. Average cycling capacity retention rates of samples with TiO 2 surface modification at 0.1 C after 150 cycles and 1 C after 300 cycles are increased by 13.5% and 23%.