Application Of The Strain Compensation Model And Processing Maps For Description Of Hot Deformation Behavior Of Metastable Beta Titanium Alloy

The flow behavior of metastable beta titanium alloy was investigated basing on isothermal hot compression tests performed on Gleeble 3800 thermomechanical simulator at near and above beta transus temperatures. The flow stress curves were obtained for deformation temperature range of 800-1100 degrees C and strain rate range of 0.01-100 s(-1). The strain compensated constitutive model was developed using the Arrhenius-type equation. The high correlation coefficient (R) as well as low average absolute relative error (AARE) between the experimental and the calculated data confirmed a high accuracy of the developed model. The dynamic material modeling in combination with the Prasad stability criterion made it possible to generate processing maps for the investigated processing temperature, strain and strain rate ranges. The high material flow stability under investigated deformation conditions was revealed. The microstructural analysis provided additional information regarding the flow behavior and predominant deformation mechanism. It was found that dynamic recovery (DRV) was the main mechanism operating during the deformation of the investigated beta titanium alloy.