Densely Quaternized Fluorinated Poly(fluorenyl ether)s with Excellent Conductivity and Stability for Vanadium Redox Flow Batteries

Cationic group distribution and elemental composition are two key factors determining the conductivity and stability of anion exchange membranes (AEMs) for vanadium redox flow batteries (VRFBs). Herein, fluorinated tetra-dimethylaminomethyl-poly(fluorenyl ether)s (TAPFE)s were designed as the polymer precursors, which were reacted with 6-bromo-N,N,N-trimethylhexan-1-aminium bromide to introduce di-quaternary ammonium (DQA) containing side chains. The resultant DQA-TAPFEs with a rigid fluorinated backbone and flexible multi-cationic side chains exhibited distinct micro-phase separation as probed by small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM). DQA-TAPFE-20 with an ion exchange capacity (IEC) of 1.55 mmol g(-1) exhibited a SO42- conductivity of 10.1 mS cm(-1) at room temperature, much higher than that of a control AEM with an identical backbone but spaced out cationic groups, which had a similar IEC of 1.60 mmol g(-1) but a SO42- conductivity of only 3.2 mS cm(-1). Due to the Donnan repulsion effect, the DQA-TAPFEs exhibited significantly lower VO2+ permeability than Nafion 212. The VRFB assembled with DQA-TAPFE-20 achieved an energy efficiency of 80.4% at 80 mA cm(-1) and a capacity retention rate of 82.9% after the 50th cycling test, both higher than those of the VRFB assembled with Nafion 212 and other AEMs in the literature. Therefore, the rationally designed DQA-TAPFEs are promising candidates for VRFB applications.