Reusable, Single-Use, or Both: A Cost Efficiency Analysis of Flexible Ureterorenoscopes After 983 Cases

Objectives: To determine which flexible ureterorenoscopy program would be most cost-efficient in our center, a cost efficiency analysis and a formula to assess cost efficiency feasibility of a hybrid model were performed. Methods: Total cost per case of reusable flexible ureterorenoscopes (rfURS) was retrospectively calculated and compared with two single-use flexible ureterorenoscopes (sufURS) marketed. A mathematical formula was developed from our data to identify the necessary increase of use of rfURS (NIU-rfURS) to be cost-efficient in a hybrid system utilizing sufURS for only high-risk-of-breakage cases. Results: In 57 months, 983 procedures were performed using 4 digital rfURS (Flex-XC; Storz), necessitating 45 repairs, with a total repair cost of euro256.809. Including the capital investment of euro24.000 per scope and euro60 per sterilization cycle, the cost per case averaged euro419 after 983 cases. Consistently using sufURS would have cost 55% to 127% more (respectively, Uscope PU3022 (R) and Lithovue (R) at euro650 and euro950 manufacturer suggested retail price). On a per case analysis, the cost was initially extremely high, but declined to reach a plateau around euro480 after similar to 400 cases. After 155 or 274 procedures, a rfURS program appeared more cost-efficient than consistently using Lithovue or Uscope PU3022, respectively. Based on our data and formula, if we would hypothetically use Uscope PU3022 or Lithovue for 15% of the cases, the NIU-rfURS is, respectively, 28% or 74% (similar to 6 or 16 cases). The NIU-rfURS increases exponentially with an increased use of sufURS. Conclusion: Consistently using rfURS is more cost-efficient than the constant use of sufURS after 155 to 274 cases. We describe the first mathematical formula that allows a calculation and feasibility assessment of using both reusable and disposable fURS. To identify whether a hybrid system may be a feasible cost-efficient alternative to a rfURS-only program, any center can calculate the NIU-rfURS by entering center-specific data in the formula.