Reliability Analysis Of Snagcu Lead-Free Solder Thermal Interface Materials In Microelectronics

PurposeIn microelectronics industry, the reliability of its components is a major area of concern for engineers. Therefore, it is imperative that such concerns are addressed by using the most reliable materials available. Thermal interface materials (TIMs) are used in electronic devices to bridge the topologies that exists between a heat sink and the flip chip assembly. Therefore, this study aims to investigate the reliability of SAC405 and SAC396 in a microelectronics assembly.Design/methodology/approachIn this paper, SnAgCu solder alloys (SAC405 and SAC396) were used as the TIMs. The model, which comprises the chip, TIM and heat sink base, was developed with ANSYS finite element analysis software and simulated under a thermal cycling load of between -40 degrees C and 85 degrees C.FindingsThe results obtained from this paper were based on the total deformation, stress, strain and fatigue life of the lead-free solder materials. The analyses of the results showed that SAC405 is more reliable than SAC396. This was evident in the fatigue life analysis where it was predicted that it took about 85 days for SAC405 to fail, whereas it took about 13 days for SAC396 to fail. Therefore, SAC405 is recommended as the TIM of choice compared to SAC396 based upon the findings of this investigation.Originality/valueThis paper is centred on SnAgCu solders used as TIMs. This paper demonstrated that SAC405 is a reliable solder TIM. This can guide manufacturers of electronic products in deciding which SAC solder to apply as TIM during the assembly process.