MBR+RO用于印染废水分质处理及回用
China Water & Wastewater(2018)
Abstract
印染废水水量大、污染物种类多、成分复杂,采用清浊分流、分质处理,可充分发挥各段工艺优势.以双膜法(MBR+ RO)为核心,采用物化+生化+膜工艺深度处理印染废水,在系统平均进水COD、氨氮、电导率分别为2 310.35 mg/L、121.20 mg/L、3 420 μS/cm的情况下,系统平均产水COD、氨氮、电导率分别为6.28 mg/L、15.87 mg/L、73.70 μS/cm,RO产水浊度、色度平均值分别为0.11 NTU、4.47倍,满足印染工艺回用标准.
MoreAI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined