Fabrication of Highly Flat, Flexible Mesh Electrode for Use in Photovoltaics

Metal mesh-based flexible transparent conductive electrodes have attracted much interest as one alternative to conventional indium tin oxide electrodes. In addition to ongoing efforts to develop scalable and cost-effective fabrication processes for high-resolution mesh patterns, the high surface roughness of the mesh which can cause short circuiting and current leakage in optoelectronic devices must be solved. Herein, high-resolution (below ~ 10 μm) mesh patterns with various thicknesses are fabricated by scalable, selective transfer printing and then stably and sufficiently sintered under delicately controlled flash irradiation. A polyethylene terephthalate (PET) film is laminated on the patterns overlaid with a UV-curable resin and then peeled off after UV curing, which produces mesh patterns strongly bonded to the cured resin to be separated in a fully embedded form. The final, highly flat, flexible mesh with a low sheet resistance of 1.7 Ω sq −1 , a high optical transparency of 88.6%, excellent mechanical flexibility, and strong adhesion to the substrate is successfully implemented in a flexible perovskite solar cell with a high power conversion efficiency (PCE) of 14.92%.