Efficiency Enhancement of the CdS/CdTe Solar Nanostructured Cell Using Electron-Reflecting Layer
IEEE Transactions on Electron Devices(2021)
Abstract
A novel nanopillar-based n-CdS/p-CdTe solar cell with p-CdZnTe electron-reflecting layer has been proposed. The proposed structure features a p-CdZnTe electron-reflecting layer at the anode electrode side of the device. Device simulation using TCAD device simulator SILVACO has shown that the open-circuit voltage (V
oc
) of the device can be improved without degrading the short circuit current density (J
sc
) of the device. Furthermore, the effect of Zn composition in the p-CdZnTe layer has also been studied on the device performance parameters of interest such as open-circuit voltage (V
oc
), short circuit current density (J
sc
), fill factor (FF), and solar cell conversion efficiency (η). A detailed analysis has shown that increasing the Zn composition beyond 40% limits the FF due to the increase in the valence band offset energy E
v
, on the other hand, lowering Zn composition below 40% decreases the much-desired conduction band offset energy (E
c
) value. The best tradeoff relationship between the Voc and FF has been achieved for the Zn composition of 40% in the p-CdZnTe layer. At this composition of Zn, the V
oc
, FF, and solar cell η of the device seem to be improved by 33%, 21%, and 61% respectively.
MoreTranslated text
Key words
Back contact,CdS/CdTe solar cell,nanopillar,photovoltaic (PV) devices,TCAD simulation
AI Read Science
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined