Bio-Inspired Evaporation From Shaped Interfaces: An Experimental Study

Evaporative interfaces help process heat and substances in a variety of technical realms, from electronic to architectural applications. Because geometry affects the hydraulics, thermal properties and aerodynamics of evaporative devices, their performance can be tuned through design. While non-smooth interfaces are widely exploited to enhance transfer passively, surface area extension in packed volumes is a predominant line of research. This leaves aerodynamic structure-transfer relations and the impact of geometry itself unclear. Meanwhile, protrusions in leaves such as lobes and toothed margins have been associated with enhanced vapor dissipation. This experimental study explores the design space of leaf-inspired structures with evaporating protrusions. Three sets of water-absorbing models with fixed evaporating surface area and unlimited hydraulic supply were tested: (1) paper strips with dimension-equivalent protrusions of varied shape and degree of elongation; (2) cellulose sponges with the same designs as their cross-sectional profile, extruded three-dimensionally; (3) ceramic tiles with grooves of varied cross-section, conceived as building elements for evaporative cooling. Overall, results demonstrate that protrusions affect mass transfer rate and surface temperatures and can be integrated in the design of evaporative exchangers with non-smooth geometries. For the paper models, evaporation rate correlated with protrusion aspect ratio, supporting a functional interpretation of leaf design and its utilization in low-wind plate-fin exchangers. However, the same transfer enhancement was not regained from simply extruding an effective design into three-dimensions. For the ceramic tiles, geometry-driven differences in evaporation depended on the aerodynamic roughness and size of the grooved pattern, and on ventilation. Their outdoor thermal behavior was complex due to a multifaceted interaction with the environment and geometry-related factors such as self-shading and thermal mass. Ultimately, this design effort illustrates the potential of structured interfaces for evaporative exchange and thermoregulating the built environment.