Effect of La Addition on the Microstructure and Properties of Al-Fe-Mn Alloys for Lithium Battery Current Collectors
JOURNAL OF ELECTRONIC MATERIALS(2021)
Abstract
Good electrical conductivity, mechanical properties and electrochemical performance are required for aluminum alloys acting as cathode current collectors of lithium ion batteries (LIBs). The effect of La alloying on the microstructure, mechanical properties and the electrochemical performance of Al-Fe-Mn alloys were characterized by optical microscopy, X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, tensile test, conductivity test and Tafel polarization curve test. The experiment results showed that Al 13 Fe 4 and Al 6 (Mn, Fe) precipitates tended to nucleate and grow along the grain boundaries. The addition of La to the Al-Fe-Mn alloy could help to refine grains and spheroidize secondary phases. These changes in microstructure could improve the tensile strength and elongation at room temperature and a high temperature of 125°C and enhance the corrosion resistance of the alloy. However, the spheroidized precipitates tended to aggregate in the alloy with 0.15 wt.% La and this uneven aggregation resulted in a decrease in tensile strength and elongation in comparison to the alloy with 0.1 wt.% La, which suggested an optimal La content for the Al-Fe-Mn alloy.
MoreTranslated text
Key words
Al-Fe-Mn alloy, La addition, microstructure, mechanical properties, corrosion resistance
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined