Fabrication Of Gradient Structured Hmx/Al And Its Combustion Performance

The incorporation of aluminum (Al) into explosives represents a facility and efficient way to enhance the energy output through the secondary reaction between Al and the detonation products of explosive. The Al/O ratio and microstructure of HMX/Al play critical roles in combustion performance and energy out-put. Herein, a gradient structured HMX/Al composite has been designed and fabricated via 3D printing technology using well-dispersed HMX/Al-based ink. For HMX/Al lines, the second reaction heat increases from 196.5 J/g to 1644.8 J/g and the burning rate would decrease from 14.6 to 12.0 mm/s with Al con -tent increased from 10 to 30 wt%. For gradient structured HMX/Al, the burning rate could be controlled by varying the component ratio and the burning rate of each component in the gradient structure was higher than that of the normal HMX/Al counterpart. Furthermore, a gradient evolution of pressure output was monitored for gradient structured HMX/Al cylinder ignited by the laser. These results indicate that the gradient structure as an effective approach can tune combustion performance and energy output of HMX/Al.(c) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.