Ageing Characterization of Transformer Paper Insulation Based on Dispersion Staining Colors of Cellulose Fibers in Oil

ieee international conference on high voltage engineering and application(2020)

Cited 2|Views1
No score
Abstract
Ageing assessment of paper insulation is important for the safe operation, maintenance and replacement of power transformers. The life expectancy of a transformer is closely related to the ageing state of its paper insulation. This paper presents novel markers for ageing characterization of paper insulation in oil-filled transformers based on the dispersion staining colors of cellulose fibers. Through the accelerated thermal ageing experiments of oilpaper insulation at 90, 110 and 130 °C, aged oil-paper samples of different ageing degrees are obtained. The changes of physical and chemical characteristics were proven. Meanwhile, the mechanism of changes of fiber refractive index during thermal ageing was studied by molecular simulation software. The simulation results show that the refractive index of cellulose fibers detached from insulation paper increases with the increment of ageing degree of insulation paper; The increase in the refractive index of cellulose during thermal ageing was a result of the combined effect of increased bulk density and increased polarization. Subsequently, the dispersion staining colors of cellulose fibers were observed by dispersion staining method. Then, the original image of dispersion staining was preprocessed. Finally, three ageing markers were proposed which were the primary color ratio-based ratio of blue, the primary color ratio-based ratio of red and color inhomogeneity. Additionally, the aged fiber samples were identified by the method of the support vector machine (SVM) according to the three ageing markers.
More
Translated text
Key words
paper insulation,ageing assessment,fiber refractive index,transformer,molecular simulation
AI Read Science
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined