Wavelength tunable InAs/InP(1 0 0) quantum dots in 1.55-μm telecom devices

This paper reviews the growth, characterization and device applications of self-assembled InAs/InP(100) quantum dots (QDs) formed by MOVPE. The problematic As/P exchange reaction during QD growth is suppressed by the insertion of a GaAs interlayer together with optimum growth conditions. This produces QDs with continuously tunable emission over the 1.55-μm wavelength region for fiber-based telecom applications. Device quality of these QDs is proven by continuous wave lasing at room temperature from the as-cleaved facets of Fabry–Pérot narrow ridge-waveguide lasers implementing widely stacked QDs as gain medium. The low transparency current density of 6A/cm2 per QD layer and low loss of 4.2cm−1 are accompanied by a 80-nm wide gain spectrum. The deeply etched QD lasers possess similar threshold current densities as the shallowly etched ones and do not deteriorate with time, revealing that device performance does not suffer from sidewall recombination. This allows the fabrication of mono-mode and more compact devices with small bending radii, as demonstrated by the operation of a QD ring laser with 40-GHz free spectral range. Unpolarized emission from the cleaved side, important for the realization of polarization insensitive semiconductor optical amplifiers, is obtained by close stacking of QDs due to vertical electronic coupling. Sharp exciton–biexciton emission from a single QD around 1.55μm is observed with clearly resolvable peaks above 70K, which is required for single photon sources working at liquid nitrogen temperature for fiber-based quantum cryptography systems.