A 5.2-Mpixel 88.4-dB DR 12-in CMOS X-Ray Detector With 16-bit Column-Parallel Continuous-Time Incremental ΔΣ ADCs
IEEE Journal of Solid-State Circuits(2020)
Abstract
This article presents a 5.2-Mpixel, 12-in wafer-scale CMOS X-ray detector that consists of lithographically stitched 169 sub-chips. The detector employs a 3T pixel with a voltage-controlled storage capacitor to achieve both a low dark random noise (RN) and a large well capacity, and the pixel outputs are read out by column-parallel continuous-time (CT) incremental delta-sigma (ΔΣ) analog-to-digital converters (ADCs). The use of a CT incremental ΔΣ ADC enables high resolution and low energy consumption while securing uniformity and robustness over the 12-in wafer. This work is fabricated in a 1P4M 65-nm CMOS technology. The 16-bit ADC implemented within a 45-μm pitch achieves a differential nonlinearity (DNL) of +0.79/-0.65 LSB, an integral nonlinearity (INL) of +6.85/-6.15 LSB, and a peak signal-to-noise ratio (SNR) of 88.5 dB with a conversion time of 12.6 μs. This detector achieves a CFPN of 181 μV
rms
, a dark RN of 267 μV
rms
, and a DR of 88.4 dB while consuming 3.9 W at 30 frames/s. Compared with the state of the arts, this work achieves 3× larger spatial resolution, 1.8× higher pixel rate, 1.9× higher energy-efficiency, and 17 dB higher DR, simultaneously.
MoreTranslated text
Key words
CMOS X-ray detector,column-parallel delta–sigma (ΔΣ) analog-to-digital converter (ADC),continuous-time (CT) incremental ΔΣ ADC,delta–sigma (ΔΣ),incremental ΔΣ ADC,pixel storage capacitor,stitching,voltage-controlled storage capacitor,wafer-scale,wide dynamic range (DR) pixel,X-ray detector
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined